Towards Cable Parallel Robot Simulation for Control End Effector Position

Authors

  • Fauad INEL Mechanical engineering department, Automatic Laboratory,University of Skikda, Algeria
  • Ali MEDJBOURI Mechanical engineering department, Automatic Laboratory, University of Skikda, Algeria

DOI:

https://doi.org/10.24203/ijcit.v9i3.12

Keywords:

Cable driven robot, Robustness,generalized predictive control, GUI.

Abstract

In this paper, we present a Graphical User Interface (GUI) simulator that has been developed using robust generalize predictive control. The proposed control technique is used for dealing with linear system uncertainties. The main contribution of this work is firstly: a graphical user interface has been developed and implemented based on geometric model , in order to, control the position of the end effector with several spatial tests. Secondly, we study the response of differential equations for our system with the proposed control for different trajectories in order to test the accurate tracking of the robot for desired trajectory simulation using MATLAB/Simulink. The Simulation results are carried out to prove the feasibility and effectiveness of the strategy outlined here.

References

1. Giovanni Boschetti, et all, 'Cable Failure Operation Strategy for a Rehabilitation Cable-Driven Robot'. Robotics , 2019, 8, 17.

Bruckmann, T., et al. Concept Studies of Automated Construction Using Cable-Driven Parallel Robots. in Cable-Driven Parallel Robots. 2018. Cham: Springer International Publishing.

Mottola, G., C. Gosselin, and M. Carricato, Dynamically feasible motions of a class of purely-translational cable-suspended parallel robots. Mechanism and Machine Theory, 2019. 132: p. 193-206.

Williams II, R.L., J.S. Albus, and R.V. Bostelman, 3D Cable-Based Cartesian Metrology System. Journal of Robotic Systems, 2004. 21(5): p. 237-257.

Demirel, M., Design of hybrid cable-constrained parallel mechanisms for walking machines. 2018, Izmir Institute of Technology.

Zi, B., et al., Dynamic modeling and active control of a cable-suspended parallel robot. Mechatronics, 2008. 18(1): p. 1-12.

Tao, Y., X. Xie, and H. Xiong, An RBF-PD Control Method for Robot Grasping of Moving Object, in Transactions on Intelligent Welding Manufacturing. 2019, Springer. p. 139-156.

Khosravi, M.A. and H.D. Taghirad, Dynamic modeling and control of parallel robots with elastic cables: singular perturbation approach. IEEE Transactions on Robotics, 2014. 30(3): p. 694-704

Inel, F., Bouchmal, B. and Khochmane, L. (2015), "Modeling and control of new model in a spatial coordinates -3D- for cable-based robots", World Journal of Engineering, Vol. 12 No. 2, pp. 189-200.

Williams, R.L., P. Gallina, and J. Vadia, Planar Translational Cable‐Direct‐Driven Robots. Journal of Robotic Systems, 2003. 20(3): p. 107-120.

Isidori, A. (1995). Nonlinear control systems, Springer-Verlag London, 3rd edition.

Errouissi, R., Ouhrouche, M. & Chen, W-H. (2010). Robust Nonlinear Generalized Predictive Control of a Permanent Magnet Synchronous Motor with an Anti-Windup Compensator. In IEEE International Symposium on Industrial Electronics (ISIE).

Downloads

Published

2020-05-31

How to Cite

INEL, F., & MEDJBOURI, A. (2020). Towards Cable Parallel Robot Simulation for Control End Effector Position. International Journal of Computer and Information Technology(2279-0764), 9(3). https://doi.org/10.24203/ijcit.v9i3.12

Issue

Section

Articles